1. Remove the device from the aluminum bag, take off the cap to expose the absorbent tip, and use it immediately within 1 hour.
2. Hold the device with the absorbent tip facing down. Place the absorbent tip directly under the urine stream until it is completely wet or immerse it (≥2/3) in the urine sample in a clean container for about 10-15 seconds. NOTE: Be careful not to wet the results window.
3. Replace the cap on the device and lay it on a flat surface so that the results window is on top.
4. Read the result in 3 minutes. Do not read the result after 10 minutes.